iOS – Using after-shot feedback

Using "after-shot"

After-shot feedback is for full speed swings.

It gives you feedback after a swing, if you were in your specified wrist angle range during certain position.

Positive sound if you were within that range, negative if out of the range.

Step 1

  1. Click on “BioFeedback” icon, left side of the screen.
  2. Turn BioFeedback mode “ON” by pressing the toggle button.
  3. Select “After Shot” BioFeedback option.

Step 2

  1. Select if you want to get feedback on wrist “flexion/extension” or “ulnar/radial deviation”.

Step 3

  1. Select if after the shot you want to get feedback on wrist position at “address”, “top” or “impact”.

Step 4

  1. Select your desired wrist angle range in degrees.
  2. If during the shot your wrist angle was in this range you will hear positive audio feedback. If it was out of the range, you will hear negative audio feedback.
  3. Make sure the feedback range is a reasonable number. For example, initially try range from -5 degrees flexion to 5 degrees extension (total range 10 degrees).

Step 5

  1. You are ready to go!
  2. Make sure your device’s audio output is turned on.
  3. Test your feedback range by hitting a shot and see if your selected wrist angle was in or out of the range.